Removing and inserting the door glass
Always turn the oven off at the mains power before you start any cleaning or maintenance.
Do not use cleaners that contain particles, abrasive cleaning powders, caustic creams, wire wool or sharp metal tools as they may damage the oven surface.
Always wear rubber gloves.
Before cleaning the oven door glass, the oven door must be removed.
- 1.
Turn the oven off at the mains power.
- 2.
Ensure the oven is cool before you start.
- 3.
Open the oven door.
- 4.
Locate the glass supports on either side of the open door.
- 5. Slightly lift the supports on closest to the edge of the door (marking 1 on the support) and pull them away from the glass pane (marking 2 on the support).
- 6. Hold the glass by the lower edge (closest to oven cavity) and carefully lift it so that it is no longer attached to the supports. Remove the glass.
- 7.
Cover a flat surface with a towel and place the glass down carefullly before attempting to clean. Clean the glass with warm soapy water and dry it afterwards with a soft non-abrasive dry cloth.
For glass that is heavily soiled you can use a specialist oven glass cleaner. Follow the instructions on the cleaning product. - 8. Very carefully replace the glass.
- 9. Slide the glass supports back into place over the glass and ensure they and clipped in place.
- 10.
Close the oven door.
- 11.
Turn the oven on at the mains power.