• Tools needed:- 8mm socket driver, philips headed screw driver, putty knife or a flat headed screw driver.
  • 1.

    Ensure the power has been switched off and remove the plug from the mains socket.

  • 2.

    Unscrew and remove the upper hinge cover (right), which is at the top right corner of the fridge.

  • 3.

    Unscrew the bolts on the upper pin hinge. (Caution: Support the fridge door whilst undoing the bolts).

  • 4.

    Remove the upper hinge pin.

  • 5.

    Lift away the fridge door and place it on a non scratching surface. (NOTE: When removing the door watch for washer(s) between the centre hinge and the top of the freezer door that may stick to the fridge door. Retain these for reuse).

  • 6.

    Open the freezer door and unscrew the bolts which hold the middle hinge.

  • 7.

    Remove the middle hinge while supporting the freezer door.

  • 8.

    Lift away the freezer door and place it on a non scratching surface (with the outside facing up).

    NOTE: When removing the door watch for washer(s) between the centre hinge and the bottom of the freezer door that may stick to the fridge door. Retain these for reuse.
  • 9.

    Remove the screw hole cover from the left hand side and place them in the holes now on the right hand side.

  • 10.

    Lay the appliance down on soft foam or similar material.

  • 11.

    Remove both adjustable feet.

  • 12.

    Remove the front foot fixed board by unscrewing the bolts.

  • 13.

    Remove the lower hinge by unscrewing the bolts.

  • 14.

    Place the lower hinge on the left hand side and tighten down with the bolts.

  • 15. Unscrew the lower hinge axis and screw into the adjacent hole.
  • 16.

    Place the front foot fixed board on the right hand side and tighten down with the bolts.

  • 17.

    Replace both adjustable feet.

  • 18. Move the door brackets on the bottoms of the fridge and freezer doors to the opposite side.
  • 19.

    Place the freezer door onto the lower hinge.

  • 20.

    Place the middle hinge into upper hole of the freezer door, then tighten down with the bolts.

  • 21.

    Place the bottom hole of the fridge door into the middle hinge.

  • 22. Unscrew the upper hinge axis turn the upper hinge over and screw back into place.
  • 23.

    Place the upper hinge into the top hole of the fridge door, then tighten down with the bolts.

  • 24.

    Replace the upper hinge cover (left).

  • 25. Install the screw hole cover.
  • 26.

    Lift the appliance back into position.

  • 27.

    Open the fridge door and install the door shelves.

  • 28.

    Close the fridge door.

  • 29.

    Plug back into the mains and switch on.

  • 30. Turn the appliance on by turning the temperature adjustment knob to the desired temperature.