• 1. Use only the water inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses. You should make sure the water tap is accessible in case of emergency.
  • 2. Locate the water inlet hose on the back of the appliance.
  • 3. Connect and tighten the water inlet hose to the cold mains water supply by turning clockwise. The cold water supply is usually indicated by a blue tap.
    Note: Only tighten the hose nut by hand, never use tools when tightening the nut as you can damage it.
  • 4. Once the water inlet hose is connected and tightened, open the tap on the supply pipe and check for any water leaks.
    Note: Check the inlet hose at least once a year. If there are any cracks, it should be replaced immediately.