Dishwashers

Connecting the water supply

1. Use only the water inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses. You should make sure the water tap is accessible in case of emergency.

2. Locate the water inlet hose on the back of the appliance.

3. Connect and tighten the water inlet hose to the cold mains water supply by turning clockwise. The cold water supply is usually indicated by a blue tap.

Note: Only tighten the hose nut by hand, never use tools when tightening the nut as you can damage it.

4. Once the water inlet hose is connected and tightened, open the tap on the supply pipe and check for any water leaks.

Note: Check the inlet hose at least once a year. If there are any cracks, it should be replaced immediately.