Laundry

1. Open the pump filter door by using the supplied spanner or another suitable tool like a slotted screwdriver.

2. Place a container or towel below or as close to the pump filter housing as you can.

3. Pull the emergency drain pipe out a far as it will go.

4. Remove the plug on the end of the emergency drain pipe.

5. This will empty any trapped water from within the appliance.

6. Screw the plug back onto the end of the emergency drain pipe.

7. Fill the detergent box with 1ltr of water and check that there is no water leaking from the plug on the end of the emergency drain pipe.

8. Place the emergency drain pipe back into the housing.

9. Close the pump filter door.