• 1. Turn off the inlet water tap.
  • 2. Unscrew and remove the inlet hose on the tap.
  • 3. Clean the internal mesh.
  • 4. Screw the inlet hose back onto the tap.
  • 5. Unscrew and remove the inlet hose on the rear of the appliance.
  • 6. Remove the mesh filter cover from the back of the appliance using a pair of pliers.
  • 7. Clean the mesh filter.
  • 8. Replace the mesh filter cover.
  • 9. Screw the inlet hose back onto the appliance.
  • 10. Turn on the inlet water tap and check both connections are water tight.