• Caution: The Water Storage Box must be removed to be filled with water.
  • 1. Remove the Water Storage Box by pulling it out of the compartment horizontally.
  • 2. Remove the cover from the Water Storage Box.
  • 3. Empty any water from the Water Storage Box, then wipe the inside of the Box and cover with a weak solution of bicarbonate of soda.
  • 4. Rinse with warm water using a sponge or cloth.
  • 5. Fill the Water storage box with water.
    Note: Only fill the Water Storage Box with water. Never with Soda Water, Juice, Milk and Alcohol.
  • 6. Replace the cover on the Water Storage Box.
  • 7. Carefully replace the Water Storage Box by pushing it into the compartment horizontally, ensuring the Water Storage Box is fully pressed into place so that the pump priming occurs.